VeriFone VX 520 Installation Manual page 23

To install a paper roll
1
Hook your finger under the latch and lift up to swing the paper roll cover open
(see Figure 8).
Figure 8 Opening the Printer Cover
2
Remove any partial roll of paper in the printer tray by lifting it up.
3
Loosen the glued leading edge of the new paper roll or remove the protective
strip. Unwind the paper roll past any glue residue.
4
Hold the roll so the paper feeds from the bottom of the roll.
5
Drop the paper roll into the printer tray.
Figure 9 Loading Paper Roll
6
Pull paper up past the glue residue.
T
ERMINAL
VX 520 Setup
VX 520 I G
NSTALLATION UIDE
S
ETUP
23