Connecting The Terminal Power Pack - VeriFone VX 520 Installation Manual

T S
ERMINAL ETUP
VX 520 Sprocket Setup
Connecting the PIN
pad or Smart Card
Reader to the VX 520
Sprocket
Connecting ECRs to
the VX 520 Sprocket
CAUTION
42
VX 520 I
NSTALLATION
Use the following procedures to connect a PIN pad to the VX 520 Sprocket.
Figure 27 provides an example of a peripheral connection to the Host USB port
Figure 27 VX 520 Sprocket Sample PIN pad Connection
1
Turn the terminal upside down to access the connection ports.
2
Insert the USB connector of the PIN pad into the USB port of the VX 520
Sprocket.
The VX 520 Sprocket terminal also supports Electronic Cash Registers (ECR).
Contact your VeriFone representative or visit the online store at
www.store.verifone.com
Figure 28 provides an example of a peripheral connection to the Client USB port.
ECRs require a separate power source. Before connecting a check reader or
similar device, remove the power cord and ensure that the indicator LED is not lit.
Figure 28 VX 520 Sprocket Sample ECR Connection
G
UIDE
for information on these devices.