Connecting Optional Devices - VeriFone VX 520 Installation Manual

T S
ERMINAL ETUP
VX 520 Setup
NOTE
Connecting
Optional Devices
CAUTION
26
VX 520 I
NSTALLATION
5
Install an MSAM card by carefully sliding it into the slot until it is fully inserted.
Figure 13 Installing an MSAM Card
Before inserting the MSAM card, position it as shown in
gold contacts facing down. The cardholder connector base has an image
resembling the notched corner of an MSAM card to ensure the card is positioned
correctly.
6
Close the MSAM cardholder panel, and then replace the terminal rear cover.
The VX 520 terminal supports some peripheral devices designed for use with
electronic point-of-sale terminals.
Before connecting any peripheral device, remove the power cord from the
terminal and ensure that the green indicator LED is not lit. Reconnect the power
cord only after you are finished connecting the peripheral device(s). For complete
information about peripheral installation and use, refer to the user documentation
supplied with those devices.
Different terminals support different devices, so for more information about
optional devices, please contact your VeriFone distributor.
G
UIDE
Figure 13, with the card's