Connecting Unit To A Pc And Ecr (Optional) - VeriFone PINpad 1000SE CTLS Installation Manual

Connecting Unit
to a PC and ECR
(optional)
CAUTION
The RS-232 version of the PINpad 1000
thru special cable products to provide power for the PINpad 1000
to Accessories and Documentation). These cables plug into the PINpad 1000
CTLS with a DB9 connector housing. The connector housing has a DC jack that
connects to a power supply for external AC power.
Figure 4 illustrates how to connect the PINpad 1000
compatible computers.
Figure 4 PINpad 1000
1
Disconnect power from the PC/ECR.
2
Connect the end of the cord with the DB9 connector to the PC/ECR.
3
Connect the modular plug on the other end of the cord to the PINpad 1000
CTLS.
4
Plug the power supply into the socket at the base of the PC/ECR connector.
5
Plug the power supply into an AC wall outlet.
6
Reconnect power to the PC/ECR.
Using an incorrectly rated power supply can damage the unit or cause it not to
work properly. For U.S. – VeriFone recommends using only VPN# CPS11212-1C-
R. For other uses see Specifications

Connecting Unit to a PC and ECR (optional)

CTLS also connects to a PC or ECR
SE
CTLS and DB9 ECR Cable Connection
SE
for detailed power supply specifications.
PIN
PAD
CTLS (refer
SE
CTLS to an ECR or
SE
1000 CTLS I
SE NSTALLATION
S
ETUP
SE
SE
13
G
UIDE