Privacy Shield (Optional) - VeriFone VX 520 Installation Manual

T S
ERMINAL ETUP
VX 520 Sprocket Setup
WARNING
NOTE
Privacy Shield
(Optional)
NOTE
44
VX 520 I
NSTALLATION
6
Plug the AC power cord into a wall outlet or powered surge protector.
7
Press the Enter key for at least three seconds to power on the terminal.
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
Disconnecting the power during a transaction may cause transaction data files
not yet stored in terminal memory to be lost.
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
VeriFone recommends connecting wall power in the following order:
1
Connect the terminal to the power supply.
2
Connect the power supply to the power cord.
3
Connect the power cord to the wall outlet.
If an application is loaded in the terminal, it starts after the initial VeriFone
copyright screen and usually displays a unique copyright screen. If no application
is loaded in the terminal,
VeriFone copyright screen.
The privacy shield protects the customers' PIN entry from being seen by the
cashier or other customers.
Merchants who install the terminal without the privacy shield must ensure the
cardholder's privacy when entering his PIN by positioning the terminal away from
open view.
G
UIDE
appears on screen after the initial
DOWNLOAD NEEDED