15. Connecting Peripheral Devices
You can connect a variety of optional peripheral devices to the
NURIT 8000.
Peripheral devices may require special adapter cables
to connect to the NURIT 8000. Certain peripheral
devices may also require an external power supply.
Refer to the specific product documentation of the
peripheral devices or contact your local VeriFone
representative or service provider for further details.
To connect a peripheral device to the NURIT 8000:
1. Connect the peripheral device to the appropriate end of the
adapter cable (see "Optional Accessories" on page 14).
2. Insert the other end of the adapter cable into the data port
on the front panel of the NURIT 8000.
6
Figure 15-1 Peripheral Device Connection
1
Contactless card reader
3
PC
5
Electronic scale
36
NURIT 8000
Note
2
1
3
5
4
2
Signature capture device
4
Barcode reader
6
Check reader
Installation Manual