VeriFone VX 520 Installation Manual page 43

Connecting the
Terminal Power
Pack
CAUTION
To connect the
terminal power pack
When you have finished connecting optional peripheral(s), you are ready to
connect the VX 520 Sprocket terminal to the provided power source.
Using an incorrectly rated power supply may damage the terminal or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the terminal matches the requirements specified on the bottom of
the terminal. (See Chapter
specifications.) Obtain the appropriately rated power supply before continuing
with troubleshooting.
1
Turn the terminal upside down to access the power port.
2
Insert the round barrel connector (see
1
2
Figure 29 VX 520 Sprocket Power Pack Connection
3
Rotate the power plug counter-clockwise and flush against the side panel to
lock the plug in place.
4
Route the cable in one of the channels on the underside of the terminal.
5
Insert the AC power cord into the power pack.
3, Specifications, for detailed power supply
Figure 29) into the power port.
T
ERMINAL
VX 520 Sprocket Setup
VX 520 I G
NSTALLATION UIDE
S
ETUP
43