Installing/Replacing Msam Cards - VeriFone VX 520 Installation Manual

T S
ERMINAL ETUP
VX 520 Setup
CAUTION
NOTE
Installing/Replacing
MSAM Cards
CAUTION
24
VX 520 I
NSTALLATION
7
Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door. (see
To prevent the paper roll cover from damaging the print roller, always gently
press down on the printer dust cover to close it.
Figure 10 Closing Paper Roll Cover
8
Tear the paper off against the serrated metal strip in the printer.
For paper ordering information, refer to
When you first receive your VX 520 terminal, you may need to install one or more
MSAM cards or you may need to replace old cards.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
G
UIDE
Figure 10).
Accessories and Documentation.