Micro Sd Card; Optional Devices - VeriFone VX 685 GPRS Installation Manual

S
ETUP

Micro SD Card

Micro SD Card
Installing or
Replacing Micro SD
Card
Optional
Devices
CAUTION
20
VX 685/VX 690 I
NSTALLATION
VX 690 supports micro SD for additional memory.
To install or replace Micro SD card:
1
Turn off the terminal.
2
Place the terminal face down on a soft and clean surface to protect the lens
from scratches.
3
Lift the battery pack to expose the micro SD card slot.
4
Insert the micro SD card into its slot.
1
2
Figure 8 Inserting a Micro SD Card
To replace Micro SD card, gently slide out the old micro SD card before
inserting a new one.
The terminal supports peripheral devices designed for use with electronic point-of-
sale system such as biometric scanner and barcode reader via the Micro-USB
port.
Power limitations for peripheral devices should be considered. The side micro-
USB supports up to 300 mA. USB 1.1 supports up to 200 mA.
Reconnect the power cord only after you are finished connecting the peripheral
device(s). Refer to the user documentation supplied with those devices for
complete information about peripheral installation and use.
Figure 9 Connecting Peripheral Devices to the Terminal via the Micro-
USB Port
G
UIDE
A B
OPEN