Installing Or Replacing Msam Cards - VeriFone VX 805 Installation Manual


S
ETUP

Installing or Replacing MSAM Cards

Installing or
Replacing MSAM
Cards
CAUTION
To install or replace
MSAM cards
NOTE
10
VX 805 I
NSTALLATION
You may need to install one or more multiple security access module (MSAM)
cards or replace the old cards.
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. VeriFone recommends
using a grounded anti-static wrist strap.
1
Remove the data cable from the back of the unit.
2
Place the VX 805 face down on a soft, clean surface to protect the lens from
scratches.
3
Loosen the retaining screw. The restraining screw is captive, which means
that it cannot be fully removed from the slot.
4
Slide out and lift the compartment door. The MSAM cardholders are now
accessible. Each cardholder consists of a slot inboard of a numbered tray.
Figure 3 Removing Screw and Opening Compartment Door
Before inserting the MSAM card, position it as shown in
gold contacts facing away from you, toward the unit. The cardholder slot in the
VX 805 has a set of contacts. The MSAM card has a notch on one corner to
ensure that it fits into the connector base in only one way; the VX 805 has a
matching notch cast into the backside of the MSAM compartment door to ensure
the MSAM card is positioned correctly when the cover is closed.
G
UIDE
Figure 4, with the card's