Establishing Cable Connections; Attaching A Cable Connector To The - VeriFone VX 805 Installation Manual

Establishing
Cable
Connections
CAUTION
Attaching a Cable
Connector to the
VX 805
The VX 805 has three general cabling scenarios, depending on what the VX 805
connects to:
1
Connecting to Another VeriFone Terminal
2
RS232 Connection Using an External Power Brick
3
Direct USB Connection
Using an incorrectly rated power supply can damage the unit or cause it not to
work properly. Use only a power pack with VPN PWR282-001-01-A (see
Specifications for detailed power supply specifications).
Before going into each cabling scenario, the cables first have to be attached to the
VX 805. To attach a cable to the VX 805, follow steps 1-4 in the
Replacing MSAM Cards
pin connector of the cable to the VX 805 as illustrated below:
Figure 6 Attaching a Cable Connector to the VX 805
section to open the compartment door then attach the 28

Establishing Cable Connections

Installing or
VX 805 I G
NSTALLATION UIDE
S
ETUP
13