Connecting The Fbu Adapter Cable To The Tfm - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
Ê Insert the holder into the chassis so that the three shoulder screw caps on
the chassis floor rest in the wide ends of the keyhole slots on the holder (1).
Ê Slide the holder to the right as far as it will go.
The shoulder screw caps on the chassis floor will lock in the narrow ends of
the keyhole slots on the holder (2).
9.3.1.5

Connecting the FBU adapter cable to the TFM

Figure 91: Connecting the FBU adapter cable to the TFM
Ê Connect the FBU adapter cable to the TFM.
Ê Install the RAID controller with TFM as described in section
expansion cards" on page
190
174.
Upgrade and Maintenance Manual
"Installing
TX1320 M1