Swapping The Processor - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

Figure 192: Installing the power cable clamp
Ê Press down on the power cable clamp until it snaps into place.
Ê Verify the settings on the new system board (see section
on page 327).

14.5.4 Swapping the processor

Figure 193: Unlatching the socket lever (new system board)
Ê Unlatch the socket lever on the new system board by pushing it down and
away from the socket (1).
TX1320 M1
Upgrade and Maintenance Manual
System board and components
"Onboard settings"
311