Replacing An Fbu; Preliminary Steps; Removing The Fbu From The Chassis - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

9.3.3

Replacing an FBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Do not throw FBUs into the trash can. Batteries must be disposed of in
accordance with local regulations concerning special waste.
For further safety information, please refer to section "Environmental
protection" in the FUJITSU Server PRIMERGY TX1320 M1 Operating
Manual.
9.3.3.1

Preliminary steps

Before replacing an FBU, perform the following steps:
Ê Disable boot watchdog functionality as described in section
SVOM boot watchdog functionality" on page
Ê Locate the defective server as described in section
server" on page
Ê Shut down the defective server as described in section
server" on page
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page 55.
Ê Open the front cage as described in section
page 60.
9.3.3.2

Removing the FBU from the chassis

Ê Remove the FBU from the chassis as described in section
FBU" on page
TX1320 M1
44.
52.
192.
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 10 minutes
74.
"Locating the defective
"Opening the server" on
"Opening the front cage" on
"Disabling
"Shutting down the
"Removing an
195