Installing The New System Board - Fujitsu PRIMERGY TX1320 M1 Upgrade And Maintenance Manual

14.5.3 Installing the new system board

Figure 190: Installing the system board (A)
Ê Hold the system board by the memory module ejectors and a PCI slot.
V
CAUTION!
– Do not lift or handle the system board by any of its heat sinks!
– Ensure not to damage the EMI springs to comply with applicable
EMC regulations and satisfy cooling requirements and fire
protection measures.
Ê At a slight angle, lower the system board into the chassis.
TX1320 M1
Upgrade and Maintenance Manual
System board and components
309