Table of Contents
Advertisement
REMOVING THE WASH PUMP MOTOR CAPACITOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug dishwasher or disconnect power.
2.
From under the sink, remove the five
screws from the front panel and remove
the panel.
Front Panel
3.
Remove the wash pump motor capacitor
mounting nut from the chassis.
Screw (1 of 5)
Wash Pump Motor
Capacitor Nut
4.
Remove the two panels from the bottom of
the dishwasher (see step 2 on page 4-14).
5.
Use a screwdriver with an insulated handle
and short the wash pump motor capacitor
terminals to ground to discharge the ca-
pacitor. NOTE: Touch the screwdriver first
to ground, and then to the capacitor termi-
nals.
6.
Disconnect the wire connectors from the
wash pump motor capacitor terminals.
Motor Capacitor
4-21
Wash Pump
Motor Capacitor
Terminals & Wires
Wash Pump
Advertisement
Table of Contents
Troubleshooting
