4.
To remove the electronic control board
and the thermal cutout:
a) Disconnect the wire connectors at P2,
the thermal cutout terminals, P4, CON2,
and the ribbon cable at P1.
b) Remove the screw from the mounting
bracket and remove the housing and
board from the dishwasher.
P2
Thermal
Cutout
P4
CON 2
Ribbon Cable
P1
Bracket & Screw
4-12
c) Unclip the thermal cutout from the elec-
tronic control board housing and re-
move the cutout.
Thermal Cutout
Clip
Clip