Thermistor; Drain Pump - KitchenAid briva KIDS01EK Technical Education

Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.

THERMISTOR

Refer to page 4-14 for the procedure for servic-
ing the thermistor.
1. Unplug dishwasher or disconnect power.
2. Disconnect one of the wires from the ther-
mistor terminals.
3. Set the ohmmeter to the R x 100 scale.
4. Touch the ohmmeter test leads to the
thermistor terminals. The meter should
indicate as follows:
47 to 53 kΩ @ 25°C/77°F
12 to 13 kΩ @ 60°C/140°F
WARNING
Electrical Shock Hazard

DRAIN PUMP

Refer to page 4-15 for the procedure for servic-
ing the drain pump.
1. Unplug dishwasher or disconnect power.
2. Disconnect the wire connector from the
drain pump terminals.
3. Set the ohmmeter to the R x 1 scale.
4. Touch the ohmmeter test leads to the
drain pump terminals. The meter should
indicate between 20 and 30 Ω.
5-4