Removing The Pressure Switch - KitchenAid briva KIDS01EK Technical Education

REMOVING THE PRESSURE SWITCH

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dishwasher or disconnect power.
2. Remove the two panels from the bottom of
the dishwasher (see step 2 on page 4-14).
Pressure Switch
3. Disconnect the wire connector from the
pressure switch terminals.
Pressure Switch
Connector
Moisture Shield
4-20
4. Lift the bottom of the moisture shield so it
is up and out of the way.
5. Rotate the pressure switch counterclock-
wise so you can easily access the pres-
sure hose, and disconnect the hose from
the switch.
6. Rotate the pressure switch a full 90° coun-
terclockwise, and align the square key
with the cutout, then remove the switch
from the mounting bracket.
Turn 90° CCW
To Remove
Pressure Hose
Moisture Shield
Cutout
Key