KitchenAid briva KIDS01EK Technical Education page 59

b) Remove the screws from each of the
dishwasher lid hinges and remove the
lid from the dishwasher.
Lid Hinge Screws
5. To remove the left or right linkage cord
and a lower guide:
a) Unhook the lid tension spring for the
linkage component (left or right) you
are removing (see step 4 on the previ-
ous page for the procedure).
Upper Guide
Linkage Cord
(Right Side)
Lower Guide
b) Remove the two mounting screws from
the lower guide and remove the guide
(the lower left guide screws are shown
below). NOTE: If you are removing the
lower right guide, you will have to re-
move the front panel to access the
screws (see step 2 on page 4-21 for the
procedure).
c) Unhook the spring, and pull the end of
the linkage cord through the opening
for the lower guide.
d) Remove the lid hinge screws for the
linkage cord you are removing, and
remove the hinge from the top of the
dishwasher (see the photo to the left).
Lower Left Guide
Right Lid Tension Spring
Lower Left Guide Screws
Continued on the next page.
4-23
Front Panel
Left Lid Tension Spring
Lower Right Guide