Table of Contents
Advertisement
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
RINSE AGENT SOLENOID
Refer to page 4-6 for the procedure for servic-
ing the rinse agent solenoid.
1.
Unplug dishwasher or disconnect power.
2.
Disconnect one of the wires from the rinse
agent solenoid terminals.
3.
Set the ohmmeter to the R x 100 scale.
4.
Touch the ohmmeter test leads to the
rinse agent solenoid terminals. The meter
should indicate between 285 and 315 Ω.
WARNING
Electrical Shock Hazard
INTERLOCK SWITCH
Refer to page 4-8 for the procedure for servic-
ing the interlock switch.
1.
Unplug dishwasher or disconnect power.
2.
Disconnect one of the wires from the inter-
lock switch terminals.
3.
Set the ohmmeter to the R x 1 scale.
4.
Touch the ohmmeter test leads to the
interlock switch terminals. The meter
should indicate continuity (0 Ω).
5.
Press on the interlock switch actuator but-
ton, and the meter should indicate an open
circuit (infinite)
5-2
Advertisement
Table of Contents
Troubleshooting
