Table of Contents
Advertisement
6.
Use a pair of pliers and squeeze the lock-
ing tab in the power cord strain relief
grommet, then pull the strain relief and
power cord out of the mounting hole.
Locking
Tab
Power
Cord
7.
Install a U.L.-listed cable clamp or conduit
connector in the power cord hole.
Cable Clamp
WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground
connector in terminal box.
Do not use an extension cord.
Failure to do so can result in death, fire, or
electrical shock.
8.
Pull the direct wire through the cable clamp
or conduit connector, and connect the
wires as follows:
• Form the ground wire into a hook.
• Wrap the hooked end around the
ground screw and below the washer in
the direction shown below, and tighten
ground screw securely.
• Use twist-on connectors of the proper
size, and connect the direct wire to the
16-gauge dishwasher wiring. Be sure
to connect the black wires together, and
the white wires together.
• Tighten the cable clamp or conduit con-
nector screws.
Hooked
Ground Wire
Direct
Wire
9.
Reinstall the terminal box. Important: The
tabs MUST be under the terminal box as
shown.
Terminal Box
2-7
Green Ground
Screw
Tabs
Advertisement
Table of Contents
Troubleshooting
