Removing The Sump - KitchenAid briva KIDS01EK Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dishwasher or disconnect power.
2. Open the dishwasher lid.
3. Remove the loading rack (see page 4-2 for
the removal and proper installation of the
loading rack).
4. Remove the drain filter assembly, the
microfilter, and sieve from the dishwasher
(see page 4-3 for the procedure).
5. Remove the poppet cover and poppet
(see page 4-4 for the procedure).
6. Remove the four T-15 Torx screws from
the top of the sump.
Top Sump Mounting Screw (1 of 4)

REMOVING THE SUMP

4-18
7. Disconnect the house drain line from the
sump.
8. Remove the two panels from the bottom of
the dishwasher (see step 2 on page 4-14).
Sump
9. Remove the thermistor from the sump
(see page 4-14 for the procedure).
10. Remove the drain pump (see page 4-15
for the procedure).
11. Remove the wash pump motor and inline
heater as an assembly (see page 4-16 for
the procedure).
12. Remove the rubber gasket from the sump
drain.
Rubber Gasket