Soft Buttons On The Track Page - Kurzweil PC3K Series Musician's Manual

LoVel
An attack velocity range can be specified as criteria for selecting Note events for editing.
The LoVel parameter sets the lowest velocity a Note needs to have in order to be edited.
Notes on the selected track(s) with a attack velocities lower than the LoVel will not be
affected by the edit. The available values are 1–127; the default is 1.
High Velocity (Hi)
The Hi parameter sets the highest attack velocity a Note needs to have in order to be
edited. Notes on the selected track(s) with attack velocities higher than the value of Hi
are not affected by the edit. The available values are 1–127; the default is 127.
When Events is set to Controller, the Controller(s) and a Controller value range can be set for
Controller events.
Controller
The Controller parameter selects the Controller (if any) or all Controllers to be affected.
LoVal
You may further specify a particular range of values to edit by setting a high and low
value. LoVal will define the lowest modifiable value in the selected controller's recorded
data. Value ranges are not definable when Ctl is set to All. Available Values are 0–127.
High Value (Hi)
Hi defines the highest modifiable value in the selected controller's recorded data. Value
ranges are not definable when Ctl is set to All. Available Values are 0–127.

Soft Buttons on the TRACK Page

FromTo is a quick way to define the region of time you intend to edit. There are a couple of ways
to use this feature when the sequence is playing back in real time, and both ways will set the
temporal boundaries of the region.
One way is to first position the cursor over the From parameter in the Region/Criteria box and
then press the Play soft button. During playback, every time you press FromTo, the PC3K
updates the value of From to match the current playback location. Position the cursor over the
To parameter to change the value of To in a similar fashion.
If you haven't selected either the From or To parameter, pressing FromTo during playback
updates From or To—or both—depending on the current playback location (the value of the
Locate parameter) at the time you press FromTo. If you press it while the Locate value is earlier
in the song than the current To value, the PC3K updates the From value. If you press FromTo
again (without stopping playback) while the Locate value is later than the current From value,
the PC3K updates the To value.
Play will start the playback of the song from the Bar and Beat set in the Locate parameter. When
the song is playing, this soft button functions as a Pause button.
Stop stops the playback of the song and return to the Bar and Beat set as the Locate value.
Go performs any of the Track‐based edit functions described above.
Done will return you to the EditSong : COMMON page.
Song Mode and the Song Editor
Song Editor: The TRACK Page
12-23