The Dsp Control (Dspctl) Page - Kurzweil PC3K Series Musician's Manual

Program Mode

The DSP Control (DSPCTL) Page

The DSP Control (DSPCTL) Page
Before reading further, be sure to read Algorithm Basics on page 6‐13 and Common DSP Control
Parameters on page 6‐14.
Press the DSPCTL soft button to call up the DSP Control (DSPCTL) page, which is displayed
below:
Function
Pitch
(Function)
(Function)
(Function)
(Function)
Level
Each field in the left‐hand column of the page is a function‐parameter of the current layer's
algorithm. You can coarsely adjust the function‐parameter in these left‐hand fields—as noted in
Common DSP Control Parameters, any adjustments made to the function‐parameters on the
DSPCTL page are reflected in the corresponding function‐parameters on the DSPMOD page.
The right‐hand side of the DSPCTL page is the subpage of the highlighted function‐parameter—
on the subpage are the fine adjust parameters and hard‐wired parameters. To access the
parameters on the subpage, highlight the function‐parameter you wish to edit, and then press
the > button to move the cursor into the subpage.
6-28
Parameter
Pitch
Fine Adjust
Hertz Adjust
Key Tracking
Velocity Tracking
(Function-Parameter)
(Function-Parameter)
(Function-Parameter)
(Function-Parameter)
Level
Key Tracking
Velocity Tracking
Range of Values
-128 to 127 semitones
± 100 cents
± 10.00 Hertz
± 2400 cents/key
± 7200 cents
(Depends on Function)
(Depends on Function)
(Depends on Function)
(Depends on Function)
-96 to 24 decibels
± 2.00 decibels/key
± 96 decibels
Default
0
0
0
0
0
(Depends on Function)
(Depends on Function)
(Depends on Function)
(Depends on Function)
-6
0
35