MIDI Note Events (>)
MIDI Controller Events (CTRL)
Tempo Change
Table 12-1
Soft Buttons on the EVENT Page
Cut: Removes the currently selected event from the Event list and temporarily stores it in a
memory buffer so that you can immediately paste it into a new location.
Copy: Makes a duplicate of the currently selected event and temporarily stores it in a memory
buffer so that you can immediately paste it into a new location.
Paste: Inserts the most recent cut or copied event into the Event list at the currently selected
Bar : Beat : Tick location. The pasted event will share the same location with the event that
already existed at that location in the Event list, but it will appear before the pre‐existing event.
New: Inserts a new event by duplicating the current event.
Done: On the View page, returns to the EVENT page. On the EVENT page, returns to the
COMMON page.
Tempo Track
To access the tempo track, use the channel up/down buttons to navigate to track 1, then press
channel down. The tempo track functions the same as the other tracks, except the only event
type available is tempo change.
Note events have four editable values: Note Name, Attack
Velocity (indicated by a "v"), Release Velocity (indicated by
a "^"), and Note Duration.
Note Number
Attack Velocity
Release Velocity
Note Duration
Controller events have two editable values: Controller Type
and Controller Value. Defined controllers are referred to by
their names.
Controller Type
Controller Value
20.00 BPM to 400.00 BPM
MIDI-event Value Ranges (Continued)
Song Mode and the Song Editor
Song Editor: The EVENT Page
C -1 to G 9
v1 to v127
^1 to ^127
Bar : Beats : Ticks
Control Source List (0 to 127)
0 to 127
12-33