Song Mode: The Metro Page; Metronome; Countoff - Kurzweil PC3K Series Musician's Manual

Song Mode: The METRO Page

All of the parameters affecting the sequencer metronome are on the METRO page. Like the
other pages in the Song Editor, you can save changes made in this page.
Parameter

Metronome

Count Off
Program
Channel
Strong Note
Strong Velocity
Soft Note
Soft Velocity
Metronome
This parameter determines the recording modes in which the metronome plays. With
Metronome set to Off, the metronome never plays. With Metronome set to Rec, the metronome
only plays during recording. With Metronome set to Always, the metronome plays during
playback and recording.

CountOff

This parameter determines the number of measures the PC3K will count off before recording.
With StartOnly selected, the PC3K will only count off at the beginning of a sequence. With
Always selected, the PC3K will count off from any point in a sequence.
Program
This parameter determines the program with which the metronome is played. If you wanted a
piano for a metronome, for instance, you could set Program to a piano program. The default
program is 998 Click Track.
Channel
This parameter determines the MIDI channel to which the metronome program and events are
sent.
Range of Values
Off, Rec, Always
Off, 1, 2, 3, 4 (StartOnly,
Always)
Program List
1 to 16
0 to 127
0 to 127
0 to 127
0 to 127
Song Mode and the Song Editor
Song Mode: The METRO Page
Default
Rec
1 (StartOnly)
998 Click Track
16
102
127
104
100
12-13