Table of Contents
Advertisement
Song Mode and the Song Editor
Song Mode: The MIXER Page
Song Mode: The MIXER Page
The MIXER page shows the current settings for the program number, panning, and volume of
each track (in groups of 8). The selected track number, as well as the range of tracks displayed
on the page, are displayed in the upper right‐hand corner of the screen. Use the Chan/Layer
buttons or the cursor buttons to change the currently selected track. To get to other pages of
tracks, continue scrolling past the first or last track on the page. The bottom part of the screen
displays current settings for the selected track including program number and name, panning,
and volume.
Changing the settings for a track's program, volume, or panning while the sequencer is
recording will record these changes, viewable in the corresponding track's EVENT page. Upon
playback, these automated mixer parameters will display their changing values in real‐time on
the MIXER page. Below is an example MIXER page:
Parameter
Current Pan
Current Volume
Current Program
Selected Track (Trk)
For Selected Track
**Uneditable, these values are an expanded view of the mixer values for the currently selected track, which
can be edited in the first three rows of the MIXER page.
The Rec, Play, and Stop Soft Buttons
These soft buttons function as described in The Rec, Play, and Stop Soft Buttons on page 12‐7.
The Keep Soft Button
Pressing the Keep soft button captures the current settings for each track's program, panning,
and volume as the initial settings. Remember to save if you want these change to be permanent!
The Done Soft Button
If no changes were made in the MIXER page, pressing the Done soft button calls up the MAIN
page. If changes were made, pressing the Done soft button calls up the "Save Changes" dialog.
12-12
Range of Values
0 to 127
0 to 127
Program List
1 to 16
Current Program**
Program List
Current Volume**
0 to 127
Current Pan**
0 to 127
Default
None
None
None
1
(Current Program)
127
64
Advertisement
Table of Contents
