Data Badge - Regency PG36NG5-R Owner's Installation Manual

DATA BADGE

This is a copy of the label that accompanies
each PG36 Zero Clearance Room Sealed Gas
Fireplace. We have printed a copy of the contents
here for your review.
Regency Gas Fireplace
Model
Gas Type
Model
Gas Consumption
Manifold Pressure
Injector Size
AGA Approval number to
Code AS4553
Electrical: 240VAC 50Hz 1.0 amp max.
918-285b
4
The label is located on the front inside base of the
unit, visible when the bottom louvre is open.
NG
PG36-NG
33 .
mj
1.0
kPa
1x 37
#
2.65mm
5815
DO NOT OPERATE THIS APPLIANCE BEFORE READING THE
INSTRUCTIONS BOOKLET.
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE
DO NOT STORE CHEMICALS OR FLAMMABLE MATERIALS
NEAR THIS APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS
APPLIANCE WHILE IN OPERATION.
DO NOT OPERATE WITH PANELS, COVERS OR GUARDS
REMOVED FROM THIS APPLIANCE.
DO NOT ENCLOSE THIS APPLIANCE.
DO NOT DO NOT MODIFY THIS APPLIANCE.
DATA BADGE NOTE: Regency
constantly being improved. Check the label on
the unit and if there is a difference, the label on
the unit is the correct one.
LPG
PG36-LPG
31 .
mj
2.6
kPa
1x 52
#
1.61mm
5815
N2134
®
Distributed by:
Western Australia:
Air Group Australia
28-30 Division St
Welshpool WA 6106
Eastern Australia:
Fireplace Products
Australia Pty. Ltd.
21-23 South Link Blvd.
Dandenong, VIC 3175
To be installed by an authorised person in
accordance with installation instructions
provided with the appliance.
Serial
262
Number
908-602a
(Australia Only)
®
Regency PG36-5 Gas Log Fireplace
units are