Table of Contents
Advertisement
This heater requires a 240V A.C. supply for the
gas control to operate. A 240V A.C. power supply
is needed for the fan/blower operation.
This appliance is equipped with a three pronged (grounding) plug for your protection against shock hazard and should
be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from
this plug.
®
Regency
PG36-5 Gas Log Fireplace
WIRING
Caution: Ensure that the wires do
not touch any hot surfaces and are
away from sharp edges.
STANDARD WIRING
WARNING: Electrical Grounding Instructions
INSTALLATION
CAUTION:
Label all wires prior
to disconnection when servicing
controls. Wiring errors can
cause improper and dangerous
operation.
29
Advertisement
Table of Contents
