Regency PG36NG5-R Owner's Installation Manual page 23

02-53
6) Place the bottom left front edge of Log
02-55 against the rear bracket on the burner
tray and rest the log on the cutout on
Log 02-53.
02-49
02-55
02-53
Rear Bracket
7) Sit Log 02-50 on the front left side of the
burner. Push the back of the log against
the 2 front brackets with the notch on the
bottom of the log fi tting into the fi rst grate
tab.
02-50
Front Brackets
02-55
02-50
Notch
®
Regency PG36-5 Gas Log Fireplace
8) Position Log 02-54 across the cutouts in
Logs 02-51 and 02-53. The notch in the
bottom right end fi tting against the 5th grate
tab.
02-49
02-51
02-51
02-55
02-50
9) Place Log 02-52 between Logs 02-51 and
02-49 and on the indentation on Log 02-54.
The bottom right end sits behind the rear
grate tab.
02-55
02-53
02-51
Log indentation
02-53
Photo shows rear grate tab.
Log 02-51 was removed to show
the positioning of Log 02-52.
02-54
02-51
5th Grate Tab
02-49
02-51
02-54
02-49
02-52
02-54
02-52
Rear
Grate
02-54
Tab
INSTALLATION
10) Place the embers on the front of the burner
tray in the places shown on the photo.
Place embers in these 3 locations
on the burner tray.
Embers
23