Replacing Consumables; Replacing The Batteries - Epson EMP-S52 User Manual

Maintenance

Replacing Consumables

This section explains how to replace the remote control batteries, the lamp,
and the air filters.

Replacing the batteries

If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. Replace the batteries. Have two spare AAA-
size alkali batteries ready to use when required.
PROCEDURE
A
Remove the battery cover.
While pushing the catch of the battery compartment cover, lift
the cover up.
Catch
B
Insert the batteries.
Check the positions of the (+) and (–) marks inside the battery
holder to ensure that the batteries are inserted the correct way.
C
Replace the battery cover.
Press the battery compartment cover until it clicks into place.
57