Monogram ZIS48N Custom Options Manual And Installation Instructions page 37

Option 2 Installation
• Drill clearance holes through the handle bracket and
Step 2
Install
custom handle
• Install screw(s) long enough to pass through the
Step 3 • Mount assembled dispenser trim with handle onto
Mount
assembled
• Drive 2 screws through the top and bottom of the
dispenser
trim
• Re-install 3 screws at top and bottom of dispenser
Again, refer to ZKT48 trim kit, Option 2.
• Follow Step 4 to install freezer door panels and bottom
• Slide freezer handle side extrusion in between panels
• To install fresh food handle, follow the same proce-
the dispenser trim.
handle bracket, dispenser trim and into the
custom handle.
the door.
handle bracket into the steel door.
trim.
Important:
bracket must be secured to the
steel door. If it is not secured
properly, the dispenser trim will
pull away from the door.
trim.
and steel door. Secure with screws.
dure as in Option 1.
ZKHT1 Trim Kit (For 3/4" Panels)
Support for Custom Handles
Handle Bracket
Handle Bracket
Secure
Assembled
The handle
Dispenser
Trim
With
Screws
Dispenser Trim
Dispenser Trim
Custom Handle
Secure
Handle
Bracket
With
Screws
Freezer
Handle Side
Extrusion
37