Monogram ZIS48N Custom Options Manual And Installation Instructions page 32

Step 4
Install
panels
• Install the lower panel by slipping tabs into the slots
• Hold in position while fitting new bottom trim against
• Install screws up through the bottom trim using
• Open door and install screws through the back side of
Step 5
• Install door handle using original screws.
Install
• Install panel on fresh food door using the same
handles
• Install grille panel using the same procedure as in
32
on the underside of the dispenser trim.
the bottom of the door. Tabs should protrude through
the bottom trim.
stubby Phillips screwdriver.
the trim and into the panel at the hinge side.
procedure as in Option 1.
Option 1.
ZKT48 Trim Kit
3/4" Custom Panels
• Place the upper panel onto the top of the dispenser
with tabs inserted into the slots.
• Push the panel back against the steel door.
• Open door and install screws through the back of the
trim and into the panel, at the top and hinge side.