Monogram ZIS48N Custom Options Manual And Installation Instructions page 33

Tools and materials
required:
• #2 Phillips screwdriver
• Stubby Phillips screwdriver
• Drill and appropriate bits
• Custom panels
• Custom handles
• Safety glasses
Note:
3/4" panel trim.
Kit Parts List:
contents
A. Fresh food door
B. Freezer door extrusion
C. Freezer door extrusion
D. Freezer door handle
This kit provides the necessary framework to install
custom handles of your choice, on 3/4" thick decorator
door panels. (Handles not included.) The door
extrusions and bracket allow custom handles to be
secured to the door structure, rather than the door
panels. This kit contains all the necessary parts for
dispenser and non-dispenser models. Follow the
OPTION 1
For non-dispenser
model
or dispenser model
using custom
collar trim
Before
you begin
3/4" custom door panels must be routed to accommodate
these door extrusions. Rout the panels as illustrated, a
maximum of 1/4" deep, and 1-13⁄16" wide, top to bottom
on the handle side.
This kit must be used in conjunction with ZKT48 trim kit for
extrusion
for non-dispenser
model and dispenser
model using custom
collar. (Option 1)
for dispenser model
using full-width trim.
(Option 2)
bracket for dispenser
model using full-width
trim. (Option 2)
Note:
depends on careful routing
depth. Do not exceed 1⁄4"
routing depth.
ZKHT1 Trim Kit (For 3/4" Panels)
These instructions are divided into 2 options:
Option 1—For non-dispenser and dispenser models
Option 2—For dispenser model using the standard
instructions in Option 1 when applying custom handles
to a non-dispenser model or dispenser model using
custom collar trim. Follow the instructions in Option 2
for a dispenser model using the standard full-width
dispenser trim.
Optimal final appearance
1-13/16"
Back Side
Freezer Panel
Refer to installation instructions for ZKT48 trim kit for
3/4" custom panels Option 1.
• Follow Step No. 1 to remove the standard aluminum
trim.
• Follow Step No. 2 and 3 to attach new 3/4" trim
pieces and install panel support brackets.
Support for Custom Handles
using custom collar trim.
full-width trim.
1-13/16"
1/4" Max.
Handle Side Handle Side
Fresh Food Panel
Back Side
33