Monogram ZIS48N Custom Options Manual And Installation Instructions page 30

Option 1 Installation
Step 5
The refrigerator is shipped with the top case trim
Adjust
secured at the 83" refrigerator height.
grille panel
• Loosen 2 screws on both sides and raise the top case
height
• Tighten all 4 screws.
Important:
bottom of grille panel.
Step 6 • Secure the new grille panel support to the back side
Secure 3/4"
panel to
• Be sure the lip on the support panel is over the top of
grille panel
support
Step 7
Install
grille panel
• Install four of the six larger under cut screws such
that the top of the screws are 1/16" from the surface of
the support.
• Attach the assembled panel to the grille frame by
inserting the four protruding screws into brackets
located on each side of the grille frame.
30
trim to meet soffit height, from 83" to 84-1/2".
Maintain 1-1/2" min. gap between top of doors and
of the 3/4" panel with #6 screws.
the wood panel.
Panel Support
Overlaps Top
Back View
Grille Panel Support
ZKT48 Trim Kit
3/4" Custom Panels
Top Case Trim
Raise To
Installation
Height
1/16"
Screws