Monogram ZIS360N Installation And Design Manual
Side by side
Hide thumbs
Also See for ZIS360N:
- Installation instructions manual (24 pages) ,
- Design manual with installation instructions (20 pages) ,
- Installation instructions manual (20 pages)
Table of Contents
Advertisement
Quick Links
Installation
Instructions
If you have questions, call 800.626.2000 or visit our website at: www.monogram.com
Side by Side Refrigerators
ZIS360N, ZISB360D, ZISW360D
ZISS360N, ZISS360D
ZIS420N, ZISB420D, ZISW420D
ZISS420N, ZISS420D
ZIS480N, ZISB480D, ZISW480D
ZISS480N, ZISS480D
Design Guide
With Installation Instructions
Monogram.
®
We bring good things to life.
Advertisement
Table of Contents
Related Manuals for Monogram ZIS360N
Summary of Contents for Monogram ZIS360N
-
Page 1: Installation Instructions
Installation Instructions If you have questions, call 800.626.2000 or visit our website at: www.monogram.com Side by Side Refrigerators ZIS360N, ZISB360D, ZISW360D ZISS360N, ZISS360D ZIS420N, ZISB420D, ZISW420D ZISS420N, ZISS420D ZIS480N, ZISB480D, ZISW480D ZISS480N, ZISS480D Design Guide With Installation Instructions Monogram. ®... -
Page 2: Table Of Contents
• Les réparations doivent être faites par un PRUDENCE technicien qualifié. For Monogram local service in your area, À cause du poids et de la taille de ce réfrigérateur et 1-800-444-1845. pour réduire le risque de blessure et de dommages, IL... -
Page 3: The Installation Space
Design Guide THE INSTALLATION SPACE DIMENSIONS AND CLEARANCES 36" Models 12" 35", 41", or 47" 42" Models 18" Case Width 48" Models 20" *Finished Width 7" * Shipping height. Electrical 84 1/2" max *84" Area 5" The height may 83 1/2" min be adjusted from Finished 74"... -
Page 4: 130° Door Swing
Design Guide Refrigerator 23-7/8" From Rear of Refrigerator 1" 2" 3" Case 3/4" 1-3/4" 2-3/4" Trim 1/2" 1-1/2" 2-1/2" 1/4" 1-1/4" 2-1/4" 1/4" 1/2" 3/4" 1" 3/4" Overlay Panel (Nominal Size) Top View 130° DOOR SWING Door 1/4" (factory setting) 1/2"... -
Page 5: 90° Door Swing
Design Guide Refrigerator Case Trim 23-7/8" From Rear of Refrigerator 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/2" Top View 90° DOOR SWING (optional setting) Door Scale 1:1 IMPORTANT NOTE – FOR DISPENSER MODELS: Dispenser models are supplied with two dispenser trims, one to fit framed 3/4"... -
Page 6: Customization Basics
ZPS420D Accessory Panels ZISB420D ZPB420D ZPS420D White, black and stainless steel accessory panels are ZIS420N ZPW420D ZPB420N ZPS420N available from your Monogram dealer. Panels are cut to ZISW360D ZPW360D ZPS360D size and ready to install. ZISB360D ZPB360D ZPS360D ZIS360N ZPW360N... -
Page 7: 1/4" Framed Panel Dimensions
Design Guide 1/4" FRAMED PANEL DIMENSIONS 5/16" Trim Door Reveal If you choose to install framed panels, they must be cut to the dimensions shown. The panels will slide into the frame on the door and grille. 1/4" Panel Non-Dispenser Models If the custom panel is less than 1/4"... -
Page 8: 3/4" Overlay Panel Dimensions
Design Guide Overlay Panel 3/4" OVERLAY PANEL DIMENSIONS Door 3/4" For a more custom appearance, overlay panels may be Spacer Panel Overlay installed on trimmed models. The overlay panel must Panel be secured to a 1/4" thick backer panel which slides into the trim. -
Page 9: Raised Overlay Panel Design
Design Guide DISPENSER MODELS: RAISED OVERLAY PANEL DESIGN 1/4" Backer Panel .10" Spacer When a raised panel design is to be used, a 3/4" Overlay Panel custom wide middle rail is required to accept the dispenser trim. • The middle rail must be wide enough to allow for the dispenser trim to overlap the opening. -
Page 10: Side Panels
Design Guide 24" SIDE PANELS FLOORING For proper installation, this refrigerator must be Side panels must be used placed on a level surface of hard material that is at whenever the sides of the the same height as the rest of the flooring. This refrigerator will be ex- surface should be strong enough to support a fully posed. -
Page 11: Step 1, Remove Packaging
Installation Instructions • Remove the four 7/16" STEP 1 REMOVE PACKAGING bolts securing the straps to the skid. CAUTION: Refrigerator is much heavier at the CAUTION: top than at the bottom – be careful when moving. When using a hand truck, handle from side only. NOT ATTEMPT TO ROLL UNIT OFF SKID. -
Page 12: Step 2A, Ro Water Line
Installation Instructions STEP 4 INSTALL ANTI-TIP STEP 2A WATER LINE BRACKETS INSTALLATION WITH A REVERSE OSMOSIS SYSTEM WARNING: ANTI-TIP PRECAUTIONS The refrigerator is top-heavy and must be secured to Skip this step when not using an RO System prevent the possibility of tipping forward. If the water supply to the refrigerator is from a ATTENTION: PRECAUTIONS CONTRE LES... -
Page 13: Step 7 Adjust Door Swing
Installation Instructions STEP 7 ADJUST DOOR SWING STEP 5 LEVEL REFRIGERATOR NOTE: This refrigerator has a 2-position door stop. All models have 4-point leveling. The front is sup- When space does not allow the door to swing open ported by leveling legs, the rear is supported by fully to 130°, you may change the door swing to a 90°... -
Page 14: Step 8 Install Grille Panel
Installation Instructions STEP 8 INSTALL GRILLE PANEL To insert framed or overlay panel into the grille: • Raise the grille panel to stop position. Raise Loosen Loosen Grille Side Side Panel Trim Trim Screw Screw Adjust Nut Below Spring to Accomodate Panel Weight •... -
Page 15: Step 9 Install Framed Panels
Installation Instructions STEP 9 INSTALL FRAMED PANELS Go to Step 9A for Overlay Panels Handle Door Trim Trim Refrigerator Door Supplied Handle Shown in 1/4" Panel Position Install door panels: • Open door to 90°. Remove the 6 Phillips head screws from the door handle. -
Page 16: Step 9A Install Overlay Panels
Installation Instructions STEP 9A INSTALL OVERLAY PANELS Door Trim Handle Trim Refrigerator Door Move Forward For 3/4" Panel Supplied Handle Shown in Overlay Panel Position Install door panels: • Open door to 90°. Remove the 6 Phillips head screws from the door handle. •... -
Page 17: Step 10 Install Dispenser Trim
Installation Instructions STEP 10 INSTALL DISPENSER STEP 11 CONNECT WATER SUPPLY TRIM Check to be sure that refrigerator power cord is not Skip this step is you are installing a stainless plugged into the wall outlet. steel wrapped or a non-dispenser refrigerator. There are two dispenser trims shipped with your refrigerator. -
Page 18: Step 12 Connect Power
Installation Instructions STEP 14 INSTALL TOEKICK STEP 12 CONNECT POWER • Locate the supplied toekick (shipped taped to • Connect refrigerator power cord plug to a properly the side of the refrigerator). Install with 2 screws grounded receptacle, accessible through the top of provided, adjust to desired height and tighten screws. - Page 19 Notes...
- Page 20 Note: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram local service in your area, call 1-800-444-1845. Note: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice.