Monogram ZIS48N Custom Options Manual And Installation Instructions page 21

Tools and materials
required:
• #2 Phillips screwdriver
• Drill and appropriate bits
• Custom door panels
• Custom handles
• Safety glasses
Kit Parts List:
contents
A. Fresh food door
B. Freezer door
C. Freezer door
D. Handle bracket for
This kit provides the necessary framework to install
custom handles, of your choice, onto 1/4" thick decora-
tor door panels. (Handles not included.) The door
extrusions and bracket allow custom handles to be
secured to the door structure, rather than the door
panels. This kit contains all the necessary parts for
OPTION 1 • Open doors to 90°. Remove the screws from the
For non-dispenser
model or dispenser
• Retain screws, discard handles.
model using custom
collar trim
Step 1
Remove
handles
extrusion
extrusion for non-
dispenser model and
dispenser model
using custom collar.
(Option 1)
extrusion for
dispenser model
using full-width trim.
(Option 2)
dispenser model using
full-width trim.
(Option 2)
full-length aluminum handles of both doors.
Note:
be used, order ZWCD2 Trim Kit.
ZKH1 Trim Kit (For 1/4" Panels)
These instructions are divided into 2 options:
Option 1—For non-dispenser and dispenser models
Option 2—For dispenser model using the standard
dispenser and non-dispenser models. Follow the
instructions for Option 1 when applying custom handles
to a non-dispenser model or dispenser model using
custom collar trim. Follow instructions in Option 2 for
a dispenser model using the standard full-width
dispenser trim.
If a custom collar is to
Support for Custom Handles
using custom collar trim.
full-width trim.
21