Monogram ZIS48N Custom Options Manual And Installation Instructions page 29

48" built-in refrigerators
Table of Contents

Advertisement

Option 1 Installation
Step 3
Apply panel
Dimension A
support brackets
ZKT48–8-3/4"
Dimension B
ZKT48–11-7/8"
• Position support bracket on freezer panel,
• Position support bracket on fresh food panel,
Step 4
Install panels
• Place the 3/4" panel on the bottom trim with support
• Carefully drill starter holes in panel using a small
• Attach the panel to the top and hinge side by installing
• Follow the same procedure to install fresh food
• Re-install door handles with original screws.
dimension A, from the hinge side edge.
dimension B, from the hinge side edge.
bracket tabs inserted into slots. Push the panel back
against the steel door, making sure panel is flush to
hinge side trim.
drill bit.
screws from the back of the trim through the wood
panel.
door panel.
ZKT48 Trim Kit
Back Side Door Panel
Hinge
Support Bracket
Sde
Bottom Edge
A
Freezer Panels
• Secure support brackets to the bottom of the panels
with #4 screws provided. Align the brackets flush with
the bottom of the panels, with tabs protruding below.
• Bracket location measured from the hinge side, is the
same for panels with custom handles or standard
handles.
3/4" Custom Panels
Support Bracket
Bottom Edge
B
Fresh Food Panel
ZKT48 – Install 19 screws
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monogram zisb48dMonogram zisw48dZis48nZisw48dZisb48d

Table of Contents