Monogram ZIS48N Custom Options Manual And Installation Instructions page 19

Step 7
OPTION 1
Secure
ANTI-TIP PRECAUTIONS
refrigerator
The refrigerator is heavy at the top and must be
at the top
secured to prevent the possibility of tipping forward.
PRECAUTIONS CONTRE LES BASCULEMENTS
Le réfrigérateur est beaucoup plus lourd en haut et
il faut le maintenir en place pour éviter la possibilité
de son basculement vers l'avant.
To prevent the refrigerator from tipping over, you must:
• Install a wood block, the full width of the refrigerator.
Secure the block with wood screws penetrating at
least 3/4" into wall studs.
OPTION 2
When using 1/2" to 3/4" side panels, the front flange of
Secure
the case trim is attached to the side panel.
refrigerator
• Open freezer door to access case trim.
at the sides
• Drill hole in case trim slightly below top hinge. Drive
screw through the trim and into the side panel.
• Follow the same procedure on the fresh food side.
OR
If refrigerator is installed between cabinets with no side
panels or in a custom enclosure, install a spacer block
as shown.
• Open freezer door to access case trim.
• Drill hole in case trim slightly below top hinge. Drive
screw through the trim and into the spacer block.
• Follow the same procedure for fresh food side.
Step 8
Check to be sure that refrigerator power cord is not
Connect
plugged into the wall outlet.
Water
Supply
• Locate and bring copper tubing to the front of the
• Turn the water on to flush debris from line, run about
• Slip a 1/4-1/4 union nut (provided) over both ends of
• Turn on the water to check for leaks.
WARNING
ATTENTION
cabinet.
a quart of water through tubing into a bucket, then
shut-off water.
the copper tubing at the right front leg of then
refrigerator and couple the lines.
Installation
48" Built-In Refrigerator
Block
Side View
Side Refrigerator Cabinet
Panel
Refrigerator
Door
Spacer
Refrigerator Cabinet
Block
Refrigerator Door
Soffit
Side View
Top View
Top View
Spacer
Block
19