Remote Power Supply Control - Fujitsu Primergy TX120 User Manual

(Window example)
C.2

Remote Power Supply Control

This section explains how to control the server power supply remotely.
The server power supply can be remote-controlled with the terminal software on the PC.
Starting Up the Remote Controller
1
Start up the terminal software.
The remote control window appears.
****************************************
* Welcome to PRIMERGY Remote Manager
* Firmware Revision x.xxA (x.xx)
* SDRR *.**
* Firmware built xxx xx xxxx xx:xx:xx *
****************************************
System Type
System ID
System Name
System OS
System Status: OK
Power Status : On
Please enter user name :
Please enter pass phrase :
Power state is displayed next to "Power Status:".
Display
On
Off
ID 0203 TX120
: PRIMERGY TX120
: xxxxxxxx
: TX120-2 (xxx.xxx.xxx.xxx)
: xxxxxxxx
table: Meaning of [Power Status]
Description
The server is powered on.
The server is powered off.
PRIMERGY TX120 User's Guide
*
*
*
249