Preparation For Using Remote Management Controller - Fujitsu Primergy TX120 User Manual

D.2 Preparation for Using Remote Management
Controller
To enable the Remote Management Controller, perform the following procedure.
• Configuring the BIOS
• Connecting the Server to a PC
Configuring the BIOS
To use the function of the Remote Management Controller, perform the following setting using the
BIOS Setup Utility.
1
Turn on the server. Press the [F2] key during POST to start up the BIOS Setup
Utility.
2
Select the [Advanced] menu → [IPMI] → the [LAN Settings] submenu, and set
the each item.
.For setting items, refer to "
3
From the [Exit] menu, select [Saving Changes & Exit] to exit the BIOS Setup
Utility.
Save the setting information of set parameters using the Server Management Tools.
For details, refer to "5.3 Storing the System Configuration Information"( → pg.131).
Connecting the Server to a PC
Connect the server to a PC using a LAN cable.
LAN Settings Submenu" ( pg.203).
PRIMERGY TX120 User's Guide
253