Uninstalling Serverstart - Fujitsu Primergy TX120 User Manual

Chapter 2 Checking before OS Installation
6
Specify the installation folder and click [Next]. To change the installation folder,
click [Browse] and select the folder.
The [Ready to Install the Application] window appears.
7
Click [Next].
Installation is executed.
When the installation is completed, the completion window appears.
8
Click [Exit].
ServerStart has been installed to the client computer.

2.4.2 Uninstalling ServerStart

Perform the following procedure to uninstall ServerStart from the client computer.
1
Click [Start] → [Programs] → [Fujitsu Siemens ServerStart] → [Uninstall
ServerStart].
2
Click [OK].
When the uninstallation is executed successfully, Fujitsu ServerStart is deleted.
48
If a message prompts you to restart the system before or after installation, eject the CD-ROM
and restart the system according to the message. When the system restarts, insert the Server-
Start CD-ROM and start installation again.
If the "This program does not respond." message appears during restart operation, click [Exit]
to continue the restart operation.