Preparation For Using Serverstart On A Client Computer; Installing Serverstart - Fujitsu Primergy TX120 User Manual

Chapter 2 Checking before OS Installation
2.4 Preparation for Using ServerStart
on a Client Computer
When using the preparation mode for setting installation information in advance or
when creating a driver disk using the FloppyBuilder function, install ServerStart on
the client computer.
System Requirements for Client Computers
Client computers must satisfy the following requirements.
Hardware
Software
Using ServerStart on the server
ServerStart can be installed to the server where Windows 2000 Server or Windows Server 2003 is
installed. Perform the procedure in "2.4.1 Installing ServerStart" ( pg.46) to install ServerStart.

2.4.1 Installing ServerStart

If a different version of ServerStart has been installed, uninstall it. The FloppyBuilder function or
installation wizard may not operate properly on a different version.
For details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" ( pg.48).
46
Personal computers operated with Windows XP Professional, or Windows 2000
Professional
(A CD-ROM drive and 10MB or more of free space are required.)
Microsoft® Internet Explorer 5.5 or later
(Note that Microsoft® Internet Explorer 7.0 or later cannot be used.)