Fujitsu Primergy TX120 User Manual page 88

Chapter 3 OS Installation Using ServerStart
5
Select the LAN controller to use and click [Next].
The [proxy DHCP Configuration] window appears.
6
Select [Yes] to run the DHCP service on the PXE server or select [No] to run
the DHCP service on the other server on the network, and click [OK].
The [Ready to Install the Application] window appears.
7
Click [Install].
Installation starts. When the installation is completed, the [InstallShield Wizard Completed]
window appears.
8
Click [finish].
The setup window appears.
9
Click [Next].
The [License Agreement] window appears.
10
Select [I accept the license agreement] and click [Next].
The [User Information] window appears.
11
Enter the user information of the software and click [Next].
The [Destination Folder] window appears.
88