Configuring Raid - Fujitsu Primergy TX120 User Manual

Chapter 3 OS Installation Using ServerStart
Installation While Maintaining the Established RAID Environment
1
Select [Logical Drive View] on the [Configuration for Disks and RAID
Controllers] window.
Add a partition
1. Click [Add Partition].
A partition is added.
Add required partitions.
2. Click [Details] and modify the settings as necessary.
The partition configuration is displayed. As the default values are configured, confirm the
settings and modify them as necessary.

Configuring RAID

When a RAID-configured disk is used
Hard disk units that have been used before may have unwanted partition information or array
configuration information, which may cause unexpected problems.
If you connect any hard disk units with usage history to this server, format them at low level on another
system before connecting them to the server. For information on how to format the hard disk units,
refer to the manual supplied with the system to be used.
58
Partition size of the FAT file system
When "FAT" is selected in [File system] and a value equal to or more than 4090MB or "Auto-
matic setting" is specified in [Partition size], the size of created partitions will be 4090MB.
The following limits apply to the volume label length. A volume label longer than the limit may
be used. However, it can cause installation failure. Enter a volume label within the limit.
•FAT: Up to 11 characters
•NTFS: Up to 32 characters