Fujitsu Primergy TX120 User Manual page 182

Chapter 7 Installing Hardware Options
7
Install the internal DAT72 unit in the optional bay.
8
Connect a USB cable and a power cable to the internal options.
1. The cables are bound with clips on the server. Open the clips.
2. Connect a USB cable and a power cable to the rear side of the internal DAT unit.
[the rear side of
3. Connect the other side of the USB cable to the USB connector on the baseboard.
For the location of the USB connector on the baseboard, refer to "1.3.4 Baseboard"
( pg.28).
182
USB connector
the DAT72 unit]
USB cable
Clip
Power connector
Power cable