Boot Options Submenu - Fujitsu Primergy TX120 User Manual

Chapter 8 Configuring Hardware and Utilities

8.2.4 Boot Options Submenu

Use this submenu to set system startup options.
Main Advanced
POST Errors:
Keyboard Check:
SM Error Halt:
Fast Boot:
Quiet Boot:
Boot Menu:
NumLock:
MultiBoot for HDs:
Boot Sequence
Help
F1
Esc Exit
Item
POST Errors
Keyboard Check
SM Error Halt
Fast Boot
Quiet Boot
Boot Menu
NumLock
MultiBoot for HDs
196
Security Server
Boot Options
[Halt On All Errors]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Boot Options Submenu
Setting
Halt On All Errors
(Unchangeable)
• Disabled
• Enabled (Initial value)
• Disabled
• Enabled (Initial value)
Disabled (Unchangeable)
Disabled (Unchangeable)
Enabled (Unchangeable)
Auto (Unchangeable)
Enabled (Unchangeable)
Exit
Item Specific Help
Setup Defaults
F9
Save and Exit
Sub-Menu F10
Description
Sets whether or not to stop the boot process and shut down
the system, in case a POST (Power On Self Test) error is
detected.
Sets whether or not to check keyboard connection during
POST.
Sets the procedure in case an error occurs regarding the fan
or temperature sensor.
Sets whether or not to reduce the scope of POST and thereby
speed up system startup.
Sets whether or not to display the logo screen instead of
POST information.
Sets whether or not to display the boot drive selection
window after POST.
By selecting the boot drive from the [Boot Menu] window,
startup can be done from the selected boot drive regardless of
the [Boot Sequence] setting.
The state of the NumLock during activation.
Sets whether or not it is possible to specify the order of hard
disks to boot the operating system (OS) when multiple hard
disk units are installed.
To perform a PXE boot, set to [Enabled].