Turning On The Server - Fujitsu Primergy TX120 User Manual

Chapter 1 Overview
The driver cover key is unique to each device. Do not lose the key.
If the key is lost, the lock must be broken and replaced on a paid basis. Manage the drive cover key
very carefully.
Contact an office listed in the "Contact Information" of "Start Guide" if you lose it.

1.4.2 Turning On the Server

1
Open the drive cover.
"1.4.1 Opening the Drive Cover" (pg.29)
2
Make sure that the CD-ROM drive is empty.
3
Turn on the display and peripheral devices.
30
• Do not move, strike, or shake the server when it is turned on. This can damage
the hard disk in the server and cause data loss.
• Turn the server on when the temperature is in its operating environment range
(10-35°C). For details about the operating environment, refer to "Start Guide"
and "Safety Precautions".
When operating the device outside of this operating environment, the server
may operate improperly, damage data etc.
Furthermore, Fujitsu cannot be held responsible for any related damage, malfunction,
or loss of data, etc.
• The fans rotate at high speed immediately after the server is turned on, but this
is not defective. When the temperature is in the server's operating environment
range (10-35°C), they start to rotate at normal speed later.
• Be sure to wait for 10 seconds or more after shutdown before turning the
server on.