Installation Overview
•
All requirements below must be met.
See the section
"Minimum
Clearances"
18" Min.
See the section
"Mantel Requirements"
See the section
"Facing Requirements"
See the section
"Hearth Requirements"
Recommended Order of Installation
•
Frame the opening for the fireplace. Make sure to allow for vent, blower, and cooling vent
installation.
•
Secure the fireplace to the floor.
•
Install the vent, blower, cooling vents, and electrical hook-up.
•
Complete the framing above the fireplace.
•
Install the hearth.
•
Install the facing.
•
Install the mantel.
•
Finalize the installation (see the instructions starting on page 26).
© Travis Industries
Installation
(for qualified installers only)
See the section
"Minimum Framing
Dimensions"
See the section
"Chimney Requirements"
See the section
4050714
"Cooling Vent Requirements"
Insulation must not fill the
spaces between the stand-offs
See the section
"Blower Requirements"
7
Figure 3
93508093